THE Technical specifications

We build our production of high quality with the natural wood
(Beech wood- Swedish wood –oak American wood-azizi wood)


Similarly, it is supposed to moisten according to qualities taken for normal conditions and geometric.
We use the German white glue for the operation of accumulation, in order to prove his vocation not to be undertaken with the heat and humidity, it is used for several years, and it is proved that when it is tight and it is not solid which does not report expansion of wood in summer and winter.

Manufacturing legs:

It manufactures all feet to be used in parts of the Roman beech furniture.

Manufacturing sides

The first:

it is the right side and circulars same direction and that their most frequent form of an arc around the horizontal or vertical commode no#
(B-644) (B-121) and is manufactured of……… .. layered beech.

The second:

what are the odds circulars in several directions as bayau no (B-6) (BM-98) and is manufactured beech wood raw or sweden according to the choice of agent

The crust:
we use the highest quality of écore artificial and natural
(Noyer-mahogani-popinga-Arrow-mahogoni French-etc.)
There it sticks with the bark of the white glue that supports the expansion of wood and climate change, and to ensure that the outer bark (final) does not cut or that did make a crack on the surface wood, it will disperse dilation between wood and bark, and one that sticks the bark mohogoni on wood directly horizontally or vertically it inside out here

manufactures of drawers:

we all manufactures of drawers lockers from of beech Romanian Wood
to evaporate thickness 1.5 cm. The fact that accumulate all from the rear to the front accumulation evaporate
The bottom of locker drawer from beech thickness 0.4 cm layers.

The relieuse back, bottom and hausseur:

The relieuse Product (commode - classeurs-secretary-etc.) Is a from beech thickness 0.4 cm layers. then covered with a layer of bark
(mohogoni) then shaves and pumice well before asking the paint.

Maketerie:

It is made with the highest quality of bark, is an elite skilled artists do the work to give the product key artistic sought.

The paintings :

all the furniture paint with paint plorithan (ALFA - CAPCI) manufactured in Italy, according to the international standard conditions permitted by the World Health Organization.

The stages of paintings:

(1) well-sanding product with a sandpaper.
(2) spraying the product with two layers with the substance of sillar.
(3) well-sanding product with a sandpaper number 320.
(4) watering once the product with 3 layers with the substance of sillar
(5) sand it is the product with a sandpaper 520.
(6) after it is made coloring product with colors ALFA depending on the colour applied and number (colour + nitro).
(7) colour fixing.
Sprinkle matter blorithan rather insipid which gives only 35% shining.

The Copper:

the choice of copper accomplished with great care. There one does copper on the product after sanding and processing of copper and then the operation of the payment of copper.

The Marble:

we use the highest quality natural marble (Indian green – Indian Red Spanish black - Red asswany - etc.). Thickness 2.5 to 4.5 cm and decorate the board.

The package:

the product packaging is accomplished with a slight layer of plastic and a cardboard thickness 0.4 m, and a soft layer is used on the product, then another layer polygonal s'affecte s 'packaging.